Smooth turning, stopping & gripping

EleCylinder rotary actuators are available in three sizes with torques up to 25 Nm. The grippers are available from small, medium to large model types with gripping forces up to 360 N.

EleCylinder rotary and part-turn actuators


With EleCylinder rotary actuators, the acceleration, speed and deceleration are precisely specified numerically. This means that the braking speed is precisely specified for a smooth stop without impact.

Printed circuit boards or other sensitive workpieces can thus be transferred precisely and smoothly from one assembly line to another.

EleCylinder 2-Finger Grippers

2-finger grippers from the EleCylinder series are available in eight sizes and various designs. The stroke per side ranges from 10 mm to 130 mm, the gripping force from 14 N to 820 N.

Like all EleCylinder they have a built-in controller for two freely selectable positions.

Adjustment of the EleCylinder grippers is 4 steps:

1st step:    Set the push motion operation
2nd step:  Enter the grip force
3rd step:   Set standby position
4th step:   Set push start point



EC rotary actuators & grippers

  With built-in controller for 2 positions. Also available with 3-position controller on request.

EC-RTB4

Rotary type

  • MOI: max. 0.011 kg·m2
  • Torque: max. 0.6 Nm
  • Rotation angle: max. 330°
  • Body width: 50 mm
EC-RTC9

Rotary type

  • MOI: max. 0.02 kg·m2
  • Torque: max. 1.5 Nm
  • Rotation angle: max. 330°
  • Body width: 90 mm
EC-RTC12

Rotary type

  • MOI: max. 0.13 kg·m2
  • Torque: max. 8 Nm
  • Rotation angle: max. 330°
  • Body width: 120 mm
EC-RTC18

Large rotary type

  • MOI: max. 0.49 kg·m2
  • Torque: max. 25 Nm
  • Rotation angle: max. 330°
  • Body width: 185 mm