Applications in the Electrical Industry
The following application examples are only a small spectrum of infinite possibilities. In addition, there are various different actuators that can be used for each application. We will advise you comprehensively and without obligation.
In addition to the standard version, many actuators are also available in cleanroom versions. More information under ➥ Cleanroom actuators.

Plate Inverter
It is a device that reverses the plate after surface inspection and passes it to the next process.

Application of Sealing Material
The process of applying sealant at 6 points.

Adhesive for Signal Lamp Covers
Applying adhesive to the lamp covers of control and signal lamps.

12 Points Inspection with 3 Actuators
The gripper grips the workpiece, the linear drive moves it under the inspection camera, and the rotary drive rotates the workpiece to inspect the other side. 12 points of the workpiece are inspected by the camera.
If the workpiece is OK, it is placed in the OK bin. If the workpiece is not acceptable, it is placed in the NG (No Good) bin.

Sorting out Defective Components
Sorting out faulty electronic components.


Filling and Transfer of Batteries
Device for filling batteries with battery fluid. The battery containers are pushed under the dispenser and after filling back onto the conveyor belt.


Inspection of Glass Substrates
This device performs a sampling inspection for glass substrates. The EleCylinder transfers the glass substrate, while the cameras perform an inspection from the top and bottom simultaneously.


Positioning Glass Substrates
This device is to adjust the distance between two guide plates according to the size of the glass substrates in order to regulate the transfer position in a glass substrate transfer line.


LED Illuminance Meter
Used for devices that measure the illuminance of LED fluorescent lamps.

Testing Circuit Boards
Testing the functionality of the contact surfaces of circuit boards by plugging them into a tester.