Production of Chemical Products
The following application examples are only a small spectrum of infinite possibilities. In addition, there are various different actuators that can be used for each application. We will advise you comprehensively and without obligation.
In addition to the standard version, many actuators are also available in cleanroom versions. More information under ➥ Cleanroom actuators.

Drip-free Filling of Test Tubes
RoboCylinders have been adopted to dispense reagents in chemical inspection equipment. To prevent dripping the liquid, the plunger is retracted slightly via a pitch feed operation after issuing the liquid by pressing the piston.

Deburring of Plastic Molding Products
Deburring the inside of lipstick caps. After processing, they are placed back on the conveyor belt.


Filling Shampoo
Machines for filling special bottles with shampoo. Filling is performed by upward movement of a nozzle, while the liquid surface rises.

Pressing in Caps
Die Verschlusskappe wird gleichmäßig auf eine Flasche eingepresst.

Inspection of Glass Substrates
This device performs a sampling inspection for glass substrates. The EleCylinder transfers the glass substrate, while the cameras perform an inspection from the top and bottom simultaneously.


Positioning Glass Substrates
This device is to adjust the distance between two guide plates according to the size of the glass substrates in order to regulate the transfer position in a glass substrate transfer line.


Two-component Mixing System
Two-component mixing system is used for the correct mixing ratio of adhesives.

Filling of Chemical Solutions
A RoboCylinder is used to fill a certain amount of chemicals into bottles.

Control of the Amount of Infusion Bags
Control of the amount of infusion bags that are being packed in one box

Cutting Device for Medical Equipment
A driving device to cut bundles of medical equipment parts. EleCylinder is used to set up cutting speed delicately and stabilize the cutting process.
