Modular RSEL & REC controller
Complete R-Unit controller series
With the new program type RSEL controller for the connection of up to 8 actuators and the REC controller for up to 16 EleCylinder actuators, together with the positionier type RCON controller, the R-Unit series is now complete.
This series of unit-connecting controllers with identical connections allows you to freely select and combine connected actuators and control methods. This saves space in the control panel.
Controllers coupled via module connection
The controller units coupled via module connection enable a variety of combinations. Simply connect a driver unit with the exact number of axes required to create a compact, space-saving controller.
Mixed controller of electric actuators with 24 volt and 230 volt motors is also possible.
Use of identical driver units
The system can be changed by simply replacing the master unit (RCON gateway unit for positioning type or RSEL unit for program type). The driver units remain the same.
RSEL controller for up to 16 actuators in conjunction with REC controller
Up to 8 axes can be connected to the RSEL controller and, in conjunction with the REC controller, in total 16 actuators.
It supports both linear and arc interpolation operations. It also allows control of connected axes to be split into two groups..
The space required for the control panel is up to 67% less compared to previous IAI models (2 MSEL controller with 4 actuators each), where a 4-axis actuator is connected to a single driver unit. The costs are reduced by approx. 44 %.
At a glance
- Simultaneous operations of up to 8 axes (16 axes in combination with REC controller).
- Different types of drivers can be combined thanks to the unit-linkage system.
- Driver unit can be shared with RCON.
- Supports control of cartesian type 6-axis robots.
- Possible to register positioning points up to 36,000.
- Supports battery-less absolute encoder, simple abso unit, incrementalencoder and quasi-abso encoder.
REC - EleCylinder connection to a field network
This field network connection unit is specifically for use with EleCylinder. It allows up to 16 axes to be connected.
It is ideal for saving wiring and space inside the control panel.
REC connection to RCON or RSEL
The REC unit is connected to the RCON or RSEL controller unit via the matching plug connections.
All information about new products, successor products and updates can be found at: New Products & Updates